Bathmate Hydrodouche is the new anal douche. Before using the Hydrodouche, ensure that the Hydro-Wand is upright in the holder and the flow regulator is fully pressed in the off position. Start your shower and select an appropriate water temperature. Allow the water chamber to fill with water until it overflows. Remove the Hydro-Wand from the holder and fully open the flow regulator while holding it tip down so that the water can flow through the hose and displace air. Once a steady flow is achieved, check the correct water temperature and set the flow regulator to the desired level. Check that there is enough water in the chamber for the intended use and refill if necessary. Alternatively, the showerhead can be positioned above the chamber to provide a constant flow. Assembly of the Hydrodouche It should be ensured that the Hydrodouche is correctly assembled to achieve full use.
The Hydrodouche consists of:
- Adjustable safety strap
- Holder / Hydro Wand holder
- Water chamber
- Chamber connection
- Hose
- Flow regulator
- Hydro wall Connection
- Hydro Wand
Product safety information
Manufacturer information:
Scala 2.0
Bijsterhuizen 3151
Wijchen, Niederlande, 6604 LV
sales@scala-nl.com
Responsible person:
Scala 2.0
Bijsterhuizen 3151
Wijchen, Niederlande, 6604 LV
sales@scala-nl.com
https://
